question

bathnm avatar image
bathnm asked

VRM Now Displaying Temperature Probes on dashboard

I have just noticed that VRM is now displaying temperature probes. Looks Great.

However I have a temperature sensor reading 71.0oC, and what looks like a VRM/Device Instance 300.

I cant find what this in my system anywhere. Is it a bug? Is it a malfunctioning sensor somewhere within maybe my Cerbo.

1613383712876.png

VRM
1613383712876.png (243.5 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Teun Lassche avatar image
Teun Lassche answered ·

Hi @Bathnm,

Your installation had some stale data from an old device. Fixed it for you

5 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

bathnm avatar image bathnm commented ·

@Teun Lassche (Victron Energy Staff) Thank you.

0 Likes 0 ·
raphael avatar image raphael commented ·

@Teun Lassche (Victron Energy Staff)

I found a Bug:

After adding a temperature sensor and removing and disconnecting it again, it still displays at the VRM portal the last value. Right now I only have the Analog Temperature Input 1 "Temp. Battery LiFePo4" connected:

1624440862421.pngTemp. PV and Temperatur [26] are disconneced!

1624440935309.png

0 Likes 0 ·
1624440862421.png (19.8 KiB)
1624440935309.png (144.2 KiB)
raphael avatar image raphael raphael commented ·

Do you think, you can look into that?
Once a Temperatur input was selected, it still showes in the VRM portal, even if I disable it again.

0 Likes 0 ·
Show more comments