question

hhyvari avatar image
hhyvari asked

Smart Lithium update failed

Hi,

I tried to update Smart Lithium battery to fw 1.20, but update failed. After failure, battery has no firmware installed, and it's not working at all. How could I get it updated and working?

firmware update
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

3 Answers
Stefanie (Victron Energy Staff) avatar image
Stefanie (Victron Energy Staff) answered ·

Hi @hhyvari,

you should be able to install the update again.

Tap on the 3 dots in the upper right corner. Go to Product Info and find Update.

bildschirmfoto-2021-02-12-um-211849.png


6 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

hhyvari avatar image hhyvari commented ·

Thanks Stefanie. I've tried update many times without success. Now battery has no firmware inside, so it's not working at all. Thus I cannot see 3 dots either.


0 Likes 0 ·
Stefanie (Victron Energy Staff) avatar image Stefanie (Victron Energy Staff) ♦♦ hhyvari commented ·

Can you see the battery still in VictronConnect?

0 Likes 0 ·
Show more comments
hhyvari avatar image
hhyvari answered ·

Service report attached.

VictronConnect_report.log


2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

mvader (Victron Energy) avatar image
mvader (Victron Energy) answered ·

Hi @hhyvari, just a note to let you know that our support staff is looking into this and will contact you by email.

1 comment
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

hhyvari avatar image hhyvari commented ·

Great, thanks.

0 Likes 0 ·

Related Resources

Additional resources still need to be added for this topic