This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
My system is setup to auto update. I've noticed that after recent update, my VenuxGX is no longer communicating with BMV-712 Smart.
VenusGX firmware is v2.62 (20210207162854)
BMV-712 Smart firmware is v4.03.
When I've reverted back to firmware to v2.60 (20200906142058) the devices can see each other without any problems, so it is definitely some bug in the latest firmware!
First try to update the firmware of the BMV, the latest version is v4.05.
The auto update setting of the Venus only updates the Venus OS not other connected devices.
I don't think it is true. Auto update should work on all devices included in the documentation.
Victron documentation it says "Remote firmware update works with VE.Direct products: MPPT Solar Chargers, BMV Battery Monitor, Phoenix Inverters, and more."
Anyway, when I've checked for new firmware through VRM, it's not showing any update for BMV712, if there is an update available that must be another bug then :)
Remote firmware update ≠ auto-update.
Try to connect directly to the BMV with the VictronConnect App and look if there is an update.
cerbo on 2.62 and 2.63 do not show the BMV 700, on 2.60 it works
The firmware on BMV 700 is on the latest 3.11
I've updated BMV-712 to the latest firmware (4.05) and Venux GX, still cant see BMV on 2.62 and 2.63 firmware version. It is working fine on 2.60.
Any idea when this bug will be fixed, cause it looks like there is couple of users that experiencing the same issue. Anyone from @Victron can comment on this?
Kind Regards
