question

hibrn8 avatar image
hibrn8 asked

what settings do I use for these results on my IP65 24|8 ?

what settings do i need to use to get these results? I am lucky if i get 10Ah charged in a day

victron-demo.jpg

BMV Battery Monitorbattery capacity
victron-demo.jpg (205.5 KiB)
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
seb71 avatar image
seb71 answered ·

What battery do you have and what are your settings?

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

hibrn8 avatar image
hibrn8 answered ·

I have 2 x 12V 75Ah batteries (so 24v 75Ah system for my mobility scooter). I need the full 75Ah each day. I have tried the charge presets on Normal and High, both at an 8A charge rate

11 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

seb71 avatar image seb71 commented ·

Lead acid, LiFePO4, something else?

0 Likes 0 ·
hibrn8 avatar image hibrn8 seb71 commented ·

Sorry, AGM’s, deep cycle

0 Likes 0 ·
seb71 avatar image seb71 hibrn8 commented ·

You can't use the full capacity from AGM.

At most 50%. And even less if discharged at high rate,

0 Likes 0 ·
hibrn8 avatar image hibrn8 seb71 commented ·

They are made for a deep level of discharge though. As for the charger, i am getting maybe 10Ah a day charge. As per the demo pic, they are recharging 70 to 80Ah easily. These batteries were new a month ago and are getting discharged more and more each day as this charger can’t keep up. My scooter with a 50km range gets 8-10kms then i have to push it home

0 Likes 0 ·
Show more comments

Related Resources

Victron BMV battery monitors product page

Additional resources still need to be added for this topic