question

pim avatar image
pim asked

Updating Multiplus yes/no

Dear readers,

In my boat I’ve got a Multiplus since 2013 (former owner placed it). I don’t think it has ever been updated. But now I want to connect it to a Cerbo which I bought recently: do I have to update the firmware of the Multiplus? I understood I have to buy a MK3-dongle then and it’s a waste of money when not necessary.

Please your advise.

Kind regards,

Pim

MultiPlus Quattro Inverter Chargercerbo gxMK3
5 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

wkirby avatar image wkirby ♦♦ commented ·

Ideally, we would need the firmware number. It will be printed on a sticker afffixed to the controller chip of the main PCB.

0 Likes 0 ·
pim avatar image pim wkirby ♦♦ commented ·

I don’t have it, it’s on the boat far away, haha. I was hoping the year of manufacturing was enough info :-)

0 Likes 0 ·
Show more comments
seb71 avatar image seb71 commented ·

You already have both. Try and see?

0 Likes 0 ·
pim avatar image pim seb71 commented ·

Of course I can try but I was hoping someone here had a similar situation :-). The multiplus is on the boat on the other side of the country and the Cerbo is on my desk so I can’t test it. And when I’m there and it appears I do need to update, I haven’t got the dongle :-)

0 Likes 0 ·
2 Answers
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

https://www.victronenergy.com/media/pg/CCGX/en/installation.html#UUID-af034207-a194-e323-86e1-8b7dae646576

2.3 The earliest version of the VE.Bus devices which can be connected to the CCGX is 19xx111 or 20xx111, which were released in 2007. VE.Bus firmware 26xxxxx and 27xxxxx are also supported …but 18xxxxx is not.

With a newer FW you will maybe have some more features.

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

pim avatar image pim commented ·

Thank you, then it will work. Do you know if there’s a feature-list of the updates?

0 Likes 0 ·
5teve avatar image
5teve answered ·

HI PIM off topic a bit but as you actually have a multiplus of similar age to mine, are you able to remotely switch the inverter on / off / charge only via CCGX? I get an error when using a raspberry pi and venusOS and I cant get any straight answers

Thanks in advance


Steve

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.