My History record the same value every day so get the same values from day 1 till the end although is charging and as well during the day 0 value are changing.
anyone experience such issue and what the best to correct it
cheers
Jorg
asked
MPPT Control display - showing incorrect History record
Can you make some screenshots of you settings, the history and live data s?
Hi jorg,
A firmware update of the MPPT Control is required to fix this issue.
The firmware can be updated by either of the following methods:
- Using a VE.Direct to USB interface (part number ASS030530010) and VictronConnect v5.34 or newer. VictronConnect is available for download from our website:
https://www.victronenergy.com/panel-systems-remote-monitoring/victronconnect. - By connecting the MPPT Control to a Venus device with internet connectivity using a VE.Direct cable (for example the one that is used to connect the MPPT Control to the MPPT) and then use the remote firmware update functionality of the VRM website: https://vrm.victronenergy.com
Kind regards,
Thiemo van Engelen
Hi @jorg,
Can you please provide the firmware versions of both the SmartSolar and the MPPT Control? I suspect that they are not running the latest version, which might explain this issue. To verify this, please disconnect the MPPT Control and reconnect it. I can be that the history is then updated to the values of that moment.
Kind regards,
Thiemo van Engelen
Dear Thiemo,
Thanks for your prompt reply, my version is 1.16
regards,
Jorg
Dear Thiemo,
Thanks for your prompt reply, my version is 1.16
regards,
Jorg
Dear Thiemo,
MTTP controller version is 1.00
regards,
Jorg
