According to the Victron guide the minimum nr of PylonTech US2000s is 7 on a Quattro 48/10000. What would be the minimum needed for PylonTech US3000s ??? THX!!!!
asked
Minimum number of PylonTech US3000's on a Quattro 48/10000
I wanted to buy 5 us3000 batteries but I am not sure they are enough to turn on the system, I have read that there are many problems when they are not those stipulated by the Victron provider, but it does not talk about the us3000, only talks about the us2000
All the info required to calculate the number of modules is in the above, yes its less than specified in the victron table for the larger modules. Do some maths and feel free to ask if your are correct.
@pabloc39 5 US3000 batteries is the minimum requirement for the Quattro 1000.
The continuous power rating of the battery bank must exceed the maximum continuous output power of the Quattro - 8000W. Five US3000 batteries are rated at 8880W continuous @48Vdc.
Don't forget to use two sets of battery cables to connect the pylontechs to your Quattro, i.e. two positives and two negatives. One set is rated at 120A, which your inverter will exceed when pulling more than 5760W @48V off the batteries.
