question

Silvio Franceschini avatar image
Silvio Franceschini asked

Access to Red Node via ip adress:1880

Hello
I'm very new to Venus OS large, just installed it and try to connect to signal K and Node Red to have a look. Unfortunately I'm not able to connect to the Node Red server at all. Seams there is a mistake I do. May someone can help me out, as I could not find any further infos.
I tried:

- via venus.local:1880
- via IP:1880

but both does not work at all. I'm able to connect to signalK via both methods :3000

I tried with switched on both signalK and Node Red and just one.
I tried on different browsers, all the same "access denied" error.
As it works with SignalK :3000 I'm don't believe it has something to do with browser setting.

Thanks for your help

Venus OSNode-RED
22 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Hi @Silvio Franceschini,

did you reboot after activating node-red?

Anything in /var/log messages?
Is node-red running? Login to the console and type in

ps | grep node-red


0 Likes 0 ·
Show more comments
2 Answers
Mark avatar image
Mark answered ·

Please confirm exactly which large image FW image you have installed (provide the file name) and what GX device you are using - there was an issue with a recent FW preventing NodeRED access on VenusGX devices, this issue was rectified in the very latest available large image FW.

PS. I have also moved this question into the 'Modification' section.

1 comment
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Silvio Franceschini avatar image Silvio Franceschini commented ·

Thanks for that, also to Stefanie.

Sadly can not post my answer in the comments. nothing happens after press publish ??

I run it on a cerbo GX and use the "venus-swu-einstein-20210113205511-v2.70_3-large-12.swu" which I guess is the latest version.

0 Likes 0 ·
janvd avatar image
janvd answered ·

I have the same problem accessing Node Red offline. Unfortunaly I have no internet connection on site. I suspect that the software want to acces https://registry... but can't. The device is a Multiplus GX with a nanopi, large image version 16 and later on version 17. I had no problem on my test setup with a raspberry pi 4 device, however this rpi4 has access to the internet.node-red-nanopi.png


node-red-nanopi.png (36.5 KiB)
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.