question

mvader (Victron Energy) avatar image
mvader (Victron Energy) asked

Venus OS v2.62~14 available for testing

UPDATE 2021-02-08: v2.62 has been released officially now, see the blogpost: https://www.victronenergy.com/blog/2021/02/08/venus-os-v2-62-inverter-mppt-rs/


Hello on this sunny Saturday!

A new version is available to test as a Release Candidate, version v2.62~14.

This post is intended for all people participating in the Venus OS Beta test program.

This beta series is still in its last paces; if nothing new is found it will be officially released within one or two weeks.

Changes in v2.62~13 & ~14

  • Fix connecting to another wifi network after a failure


To see the changes in previous v2.62 beta versions, start with the previous post, here.


Enjoy the weekend,


Matthijs

Venus OS
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

3 Answers
mvader (Victron Energy) avatar image
mvader (Victron Energy) answered ·

v2.62 has been released officially now, see the blogpost: https://www.victronenergy.com/blog/2021/02/08/venus-os-v2-62-inverter-mppt-rs/

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Paul B avatar image
Paul B answered ·

Ok on a test site that was on 12 with a CCGX and connected via lan cable to a router and that router connected to the internet via wifi. I upgraded this site to 14 but the the lan internet did not come back on line


on my home site a Venus GX was using wifi connect it did come back on line ok

5 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

mvader (Victron Energy) avatar image mvader (Victron Energy) ♦♦ commented ·

Hi @Paul B, that LAN connection not coming back online is most likely a coincidence or some other issue: nothing was changed that touches LAN connections.


is it still not online? Any other information? For example: Did it get an IP address? Is the issue reproducible? Are the ethernet LEDs blinking on the ethernet connector on the Venus GX?

0 Likes 0 ·
Paul B avatar image Paul B mvader (Victron Energy) ♦♦ commented ·

this one is a CCGX- ill know more latter on sunday I reported it quickly just in case.

its was on 12 as its got 3 AC sensors so thought it was a good one to test it on as they were giving a few issues

0 Likes 0 ·
Paul B avatar image Paul B Paul B commented ·

Folowup

a reboot returned all operation to normal

the router was also rebooted

0 Likes 0 ·
Show more comments
thomasw-1 avatar image
thomasw-1 answered ·

I migrated from beta 10 to beta14 and have following immediate observations:

  • Grid setpoint is not really considered anymore, even with activated feed-in.
    I know that Izak configured a highler level for zero-feed-in.
    Since the upgrade I have an average grid power consumption of min 180W in average (also with activated feed-in) as long as there are only a few watts coming from inverter. As soon as inverter stops grid-setpoint is respected again.

  • Power flow direction is mostly shown wrongly. Even if there is a constant battery usage, the power flow switches between both directions. In versions before the visualisation was not perfect, but now it works like a random generator (see attached video)


energyflow.mp4 (8.1 MiB)
1 comment
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

mvader (Victron Energy) avatar image mvader (Victron Energy) ♦♦ commented ·

Hi, thank you! There indeed is a bug, but its not a regression in v2.62.

Its an issue introduced in v2.60 and there is a workaround as Izak explained you.

What we'll probably be doing is release v2.62 next week; and look at this for v2.63 quickly thereafter.

0 Likes 0 ·

Related Resources