Adding a additonal SmartShunt .. will it show in the Raspberrypi

Question

replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

question

fenix asked Jan 29, '21

Adding a additonal SmartShunt .. will it show in the Raspberrypi

HI

I am looking to gather the data in my Home Assistant Dashboard for the Orion-TR smart 12-12 30AD c-DC I know that the data is fed with the Bluetooth but Victron don't give us the possibility to connect to I was thinking adding an additional Shut at the output of the DC-DC with the Ve-cable

- It this feasible?

- Will it disturb the overall electrical system?

- If yes, will the additional shut be displayed on the RaspberryPI 7 inch screen?

- If yes, will it be possible the get the information via the MQQT mapping

SmartShunt orion-tr smart Raspberry Pi MQTT home assistant

1611926586881.png (463.6 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Stefanie (Victron Energy Staff) answered · Jan 29, 2021 at 02:06 PM

Hi @Fenix,

you can have more than one SmartShunt and it will show up on your GX device (Pi) on the device list as long as it's connected via a VE.Direct to USB adapter. Not disturbances in the electrical system.

Not 100% sure about MQTT mapping. That's something you need to try.

6

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

fenix commented · Jan 29, 2021 at 02:09 PM

@Stefanie ,,is it something you did?

if yes could you show the display of the GX device (pi)?

tks

0 ·

Stefanie (Victron Energy Staff) ♦♦ fenix commented · Jan 29, 2021 at 02:10 PM

I did this before, but currently have the SmartShunt not connected to the system. It works.

0 ·

fenix Stefanie (Victron Energy Staff) ♦♦ commented · Jan 29, 2021 at 02:32 PM

quick one.. what was your usage of the second Shunt in your case?

0 ·

Show more comments

Stefanie (Victron Energy Staff) ♦♦ fenix commented · Jan 29, 2021 at 02:21 PM

Just connected it to my test system. Here is how it looks like on the remote console:

It appears as a normal shunt just like the other, just not on the graphical overview. That belongs only to the main shunt, which in my case is the BMV-702.

0 ·

bildschirmfoto-2021-01-29-um-151737.png (127.3 KiB)

bildschirmfoto-2021-01-29-um-151837.png (131.5 KiB)

fenix Stefanie (Victron Energy Staff) ♦♦ commented · Jan 29, 2021 at 02:33 PM

tks you so much for your time

quick one.. what was your usage of the second Shunt in your case?

0 ·

Modifications Space

Node Red Space

Answer 1 · 2022-11-04T04:09:38Z

friaras answered · Nov 04, 2022 at 04:09 AM

I have 2 battery banks and both shunts show on the menu but not on the graphical overview, but if you log to the VRM portal you will see the data from the shunt. I would love to be able to see it on the overview to avoid having to log online to glance at it.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 2 · 2022-11-04T05:09:00Z

Kevin Windrem answered · Nov 04, 2022 at 05:09 AM

You can program SmartShunts (and possibly the BMV-712) as a "DC meter". Then under that you can select a device type. You should choose one of the charging sources like alternator or if nothing is appropriate choose the generic charger.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

question

Adding a additonal SmartShunt .. will it show in the Raspberrypi

Related Resources

question details

Modifications Space

Node Red Space

question

Adding a additonal SmartShunt .. will it show in the Raspberrypi

Related Resources

question details

Related Questions

Modifications Space

Node Red Space