This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi
I have the following setup:
Multiplus 24V
MK2 for PC configuration
Venus GX
Pylontech UP2500 x 2
The system works well and I now want to replicate the system in production.
I want to avoid having to manually enter settings for the Venus and Multiplus for efficiency and accuracy. Is there a way to backup settings from one set of equipment and restore it to another? Both for the Venus and Multiplus?
Thanks in advance
Hi @PowerLust - nice name :)
The good news - it is quite straight forward to backup and restore settings from the MultiPlus.
The bad news - there is not yet a supported way to backup and restore settings on a GX device - it is a known feature request though.
For the MultiPlus, given you have the MK2 (and not the MK3) you need to use VE.Configure - MK3 users are recommended to use VictronConnect - it's simpler.
The relevant section of the VE.Configure manual that describes the steps is available here
6. Save, Load and Export Settings
If you have any issues with that, please let me know. I have a training video available that also demonstrates this in the Victron Professional Online Training program.
Thank you kindly Guy.
Ive read that one can clear the settings on the Venus by deleting the following files (after rooting the device)
would copying these files from one Venus to another duplicate settings?
Thanks again
Hi @Guy Stewart (Victron Community Manager),
Thanks for this info; I have the MK3 and VictronConnect (on Windows 10), but there doesn't seem to be a way to save settings files from VictronConnect. If necessary I can install VE.Configure and use that, but since you recommended VictronConnect I thought I'd check and see if I was missing something.
When I open the Multiplus in VictronConnect this is what I see:
Is there a way to do this that I've missed?
Thank you kindly Guy.
Ive read that one can clear the settings on the Venus by deleting the following files (after rooting the device)
would copying these files from one Venus to another duplicate settings?
Thanks again
