question

steven-solar avatar image
steven-solar asked

VE.Direct Cable Length

Hi there.

Situation: Battery, MPPT Smart Solar and Multi are in the barn, CCGX ist in the living room.

VE.Direct max. Cable length is 10 meters. Distance I have to build is 20-25 meters.

Any ideas? Maybe convert VE.Direct Protocol to CAN? Or just use some BUS Amplifiers such as 7406? (I am an eduacated electronic technician with no fear of soldering irons :-)

Or convert VE.Direct to any other Protocol such as TCP/IP? Wireless/ BT is no good idea because of some thick walls.

Thank you very much for helping!

Greetings

Steve

VE.Direct
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

3 Answers
Guy Stewart (Victron Community Manager) avatar image
Guy Stewart (Victron Community Manager) answered ·

The cheapest solution that MAY work is to use the VE.Direct to USB adapter, and then an Active, powered, boosted USB extension cable. I have done that for 1.5M + 15M before and it worked fine.

This one claims up to 50M - but is a bit expensive.

6 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

steven-solar avatar image steven-solar commented ·

That sounds good. And it does take not much effort. Thank you.

For further developments: I'm sure there are many people out there who have their Displays in their living space. An ethernet connection would be much better.

Groetjes

Steven

0 Likes 0 ·
JohnC avatar image JohnC ♦ steven-solar commented ·

Hi Steven. Indeed there are other ways. Relegate your CCGX to the barn, add RJ45 cable to your router in the house, and away you go. Full functionality and control either via VRM portal or LAN directly. It exists already, Guy was answering your specific question.


0 Likes 0 ·
steven-solar avatar image steven-solar JohnC ♦ commented ·

Hey JohnC,

that would work but leaving my 500 Euro CCGX in the barn was not planned. And I'm not keen of running another device with VRM if theres an existing item.

Searching the web I discovered USB to Ethernet Adapters. That would be a solution I would prefer. Does anybody already tried one of these Adapters?

Greetings

Steve

0 Likes 0 ·
Show more comments
JohnC avatar image JohnC ♦ steven-solar commented ·

Then there's this: https://community.victronenergy.com/questions/4199/best-tablet-for-an-external-ccgx-display.html Look who posted it.. :)

0 Likes 0 ·
steven-solar avatar image
steven-solar answered ·

Finally found a solution: After 10 Meters inserting a standard TTL 7407 will do the magic: It works :-)

Maybe some other guy out there will be thankful for this hint.

Have fun!

Greets

Steve

2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

matteburk avatar image matteburk commented ·

Hi How did you connect the TTL 7407 ? Still working good?

3 Likes 3 ·
Rod avatar image Rod commented ·

Steven: would you please contact me via whatsapp to +1 786 468 9998 ?

i need your help with your hint

"Finally found a solution: After 10 Meters inserting a standard TTL 7407 will do the magic: It works "

thank you

Rod

0 Likes 0 ·
tom-alexander-hatlen avatar image
tom-alexander-hatlen answered ·

me curious too, have the same issue, think 10 meters is just a 2-3 meters to short :(

from my second mppt in the cabin to the "barn" where i have another mppt and plan to put the globallink 520 next to.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

VE.Direct protocol FAQ