This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I just noticed that the Venus GX allows for digital inputs via RJ12 socket. I feel a bit dumb asking this question but how does on get a device (e.g. bilge pump) connected in to a RJ12 socket? Is there a digital input device which i would connect deceive like this to, and then connect to the venus per the RJ12 cable.
Any information you could provide would be great, i would love to use this future but just dont have a full understanding how.
It's all here:
https://www.victronenergy.com/live/venus-gx:start#overview_of_connections
Basically: you can connect a switch between the ground pin and one of the inputs of the RJ11.
Works great.
I have also just made a change to that manual that @boekel has linked to:
https://www.victronenergy.com/live/venus-gx:start#digital_inputs
I am quite open to suggestions for how it could be further improved or clarified. Such as rough sketch diagrams, photos of installations or descriptions.
Thanks! A bit more specific, would something like this work?
https://www.amazon.in/Generic-Terminal-connector-splitter-accessory/dp/B06XQ273JT
For example with a bilge pump would i run a wire from the bilge positive to the RJ12 digital 1 input? Would i then connect the ground to the main ground? (sorry but this is where i'm getting a bit confused).
@Guy Stewart (Victron Energy Staff) If I want to use a digital input in a custom python script in Venus should I set it to Disabled in the gui?
