This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I have just purchased a used RV with the devices below. I loaded the app and tried '000000', did not work. Read the manuals and couldn't find where to reset pin number. Also no button on Smart Dongle.
SmartSolar MPPT 150/100 Controller
VE.Bus Smart dongle
On the device list, tap on the 3 dots. You need the PUK code (which should be on a label on the device).
Do I need to connect to all the devices I see in the app or just the BMV - 712?
You need to reset the PIN code for each device.
Each has a different PUK code and each can have a different PIN.
Yea, I get that. Is the reason to connect to the controller and dongle is to do firmware updates? Any data available I would need to see? Is the 712 the 'View' and configuration of the system?
Not just for updates. Also if you want to see and possibly change the settings.
BMV is just the shunt (with a display attached).
The "brain" of a Victron system is a GX device (which apparently you do not have - but that is not unusual for small systems).
Found them, Thanks. What if the PUK / SN tags had been removed/damaged?
