This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hello together,
is it possible to get the values of the Resistors?
my Charger get up to 16,X Volts and like seen on the Picture, there are 3 burned resistors.
i dont know if the resistors are the reason or the impact for the problem so in first step i want to change the burned ones.
Kind regards
Daniel
Unfortunatly my charger is a 24V 25A but the control board looks similar to yours however these may be diffferent:- R160 is a 220 Ohm 2W, the resistor you have burnt is 1K ohm 0.6W, both look to be metal film.
Hope this helps, John
