Designing an all Victron Li system for my Sprinter van. I have a 220 amp alternator and while I know that I may not be able to use half that for charging my house system, I want to be able to use as much as the system will allow. So I got a BMS 12/200 thinking it would allow up to 200 amp charging. Now I see that the input (AB) is limited to 80Amps when using a 100 Amp fuse. That's still a lot, and maybe more realistic about what I can expect but still not 200. It seems installing a larger fuse would allow more, but elsewhere it says this is limited to 80 amps.
And nowhere do I see a table of fuses I can use on the LB side. I have the multiPlus 12/3000 and other loads on the LB side - I want to put a big old fuse in there but how big?