question

bocas-uflex avatar image
bocas-uflex asked

Charnging LFP from two alternators

Hi everybody. I need to charge a Li battery bank from 2 different alternators. System configuration is as follow:

Engine 1 24V 60A alternator with internal regulation connected to its start lead battery

Engine 2 24V 60A alternator with internal regulation connected to its start lead battery

House battery back is 2 x 25,6V LPF Smart 200Ah with Ve.BUS BMS.

The idea is to send two alternator positive to the busbar and put a cyrix Li-charge between them and the lithium battery bank. is there any synchro issues?

Boat owner would like to use Buckboost but I have no knowledge ho to manage with two alternators. Do you have any advise?

Lithium BatteryOrion DC-DC Converters not smartalternator
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
lehrling avatar image
lehrling answered ·

Maybe there is something in this post that could help?

https://community.victronenergy.com/questions/74124/alternator-charging-orion-tr-vs-pheonix-ve-direct.html

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

safiery avatar image
safiery answered ·

@Bocas_Uflex We use our alternator controllers that sit on CANbus and have a master slave option. We have perfected the configuration for Victron Lithium with the Mini-BMS output pushing both controllers to Float mode in the event that volatage detection had not already done that. Have completed many jobs. We are a Victron Dealer in Australia.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic

Victron DC-DC converters product page