This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hello. Just recently had to travel for a few days. Unplugged load from invertor but left panels connected via Victron MPPT to FLA batteries. Also had battery sense and battery safe connected.
When I returned I saw that each day seems to have used 500w. Is this normal and where does this energy go?
Wh, not W.
The energy went into your battery and also to power all devices you still have powered by the battery.
No I didn't turn the invertor off. Sorry yeah wh. I guess what I mean is if no ther systems are connected except 1000w invertor, MPPT, batterymonitor and batteryconnect is this use normal.seems my normal use is 1.6kwh so 550wh without anything seems high.
You removed the load from your inverter but did you turn the inverter power off?
Inverters use a small amount of power even without a load.
Best practice might be to have a switchable breaker in the inverter power feed circuit.
Many places power could be going including battery as seb71 suggested.
No I didn't turn the invertor off. Sorry yeah wh. I guess what I mean is if no ther systems are connected except 1000w invertor, MPPT, batterymonitor and batteryconnect is this use normal.seems my normal use is 1.6kwh so 550wh without anything seems high.
