question

Bill avatar image
Bill asked

How would I populate the AC Input & AC Load fields on the GX webpage without a Victron Inverter?

I currently have a fairly new PSW Magnum Inverter that provides all the power needed. So I am not prepared to get a new inverter in the foreseeable future. I am looking for a way to populate the AC Input and AC Load fields in the gui from my VGX

1610478184306.png


Venus GX - VGX
1610478184306.png (124.9 KiB)
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
wkirby avatar image
wkirby answered ·

This data is read directly from the Victron inverters using their own interfaces and communications protocols. Other manufacturers would not use the same interfaces or protocols, so this information cannot be read out.

4 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Bill avatar image Bill commented ·

What is this wireless AC sensor field for in the Cerbo?

1610814019746.png


0 Likes 0 ·
1610814019746.png (78.5 KiB)
wkirby avatar image wkirby ♦♦ Bill commented ·

That AC sensor is intended to measure the power from a grid tied solar inverter and it actually needs to be connected to an existing MultiPlus or Quattro.

0 Likes 0 ·
Show more comments