Connecting an Intellisense Nano Generator controller to a Multiplus 2

Question

replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

question

rob-townsend asked Jan 12, '21

Does someone know which relay connections are to be used to connect a Pramac Intellisense Nano controller to my Multiplus 2.
‘Thanks Rob.

Generator

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2021-01-12T09:46:04Z

markus answered · Jan 12, 2021 at 09:46 AM

You can choose from the following options:

BR

1610444667008.png (66.4 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 2 · 2021-01-12T10:09:12Z

rob-townsend answered · Jan 12, 2021 at 10:09 AM

What about the wiring. Its just 2 wires. Where do I connect them.

1

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

markus ♦♦ commented · Jan 12, 2021 at 10:17 AM

Does this help you?

0 ·

1610446645831.png (229.1 KiB)