Hello,
the EasySolar 48/5000 comes with a built in ColorControl.
Is this exactly the same as the "stand alone" ColorControl GX?
Does it have the same in-/outputs and connections and are they all accessible inside the EasySolar case?
Thanks :)
asked
ColorControl inside EasySolar 48/5000
Yes it is exactly the same unit as sold separately.
I have an easy solar 5kva at home. The top panel can be opened and accessed without any issues.
Hey @Alexandra,
I stumbled across the next question, and since you have the 5kva unit that i plan on buying, i thought i ask you directly, hope you see this!
I am in the planning process for my upcoming offgrid system, thats why i ask questions like this:
How is the smart mppt hooked up to the ColorControl? is it done via the VE.direct port?
The reason why i am asking: i wanna build the system with LiFePo Batteries, so together with a VE.Bus BMS. The BMS wants to tell the charger to stop loading because of overvoltage. It does tell the AC charger inside the multiplus part of easysolar of cause via the VE.Bus.
But as far as i could find out, the "charge disconnect"-comment will not be passed on from the multiplus to the colorcontrol, then forwarded to the mppt. you know any about this?
thus a separate connection from BMS to mppt is neccessary, which would be a "ve.direct non inverting remote cable" to connect from bms "charge disconnect" to the mppt ve.direct.
so coming back to the question, is the ve.direct on the mppt available?
thank you so much for having a look at that. :) valentin
Ah super! Thank you i was reallly hoping to hear this.
