My blue solar mppt75/15 is set up and running well I have the jump wire between pin 2 and 3 on the coms port but the green led flashes sometimes and is solid sometimes it should be solid , the yellow led is doing what it’s supposed to
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
My blue solar mppt75/15 is set up and running well I have the jump wire between pin 2 and 3 on the coms port but the green led flashes sometimes and is solid sometimes it should be solid , the yellow led is doing what it’s supposed to
It seems to be a fault code of some sort the unit works properly just want to know what the green led flashing intermittently means, it is set up as 24v but I’m using one deep cycle batt and one cranking batt the voltage across them is 12.60and 12.16 I wonder if the unit is picking this up
Cheers all
If you have Battery Life enabled, then the green LED flashes when in Float with Battery Life. Regular Float mode, the LED is solid green.
4 People are following this question.