This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi, I have a power bank with an inbuilt PWM controller. The solar panel I use has an open circuit voltage that is too high for the internal PWM, so I’ve had to cover parts of the solar panel to reduce the Voltage to a safe level for the PWM to operate. I am considering buying an MPPT controller to reduce the Voltage and increase the Amps from the panel before sending the power on to the PWM and power bank. If I can get the MPPT battery charge profile right, would this scenario work?
Hi @drtpotter
I'm not sure, but I think the mppt would object to being 'pulsed'.
Why wouldn't you just flick the pwm and go direct with the mppt?
Indeed, but the PWM is "inside" the sealed powerbank unit. Flicking the PWM means opening things and voiding warranties.
I'm sorry, I don't know. Maybe someone else has tried this and can comment..
No problem, I've since given up on looking for a solution and gone with a different solar panel. If there was a Victron product (dcdc converter or mppt controller that is ok with pulses) that could have solved the problem I likely would have bought it. Perhaps there is space here for a future Victron product if it doesn't already exist.
Hi if you put the MPPT unit directly to the panels then the output of the MPPT direct to your PWM
and as long as the output from the MPPT does NOT exceed the PWMs limits amps wise then I see no problem it doing the above as the PWM would only see the 13-14v output from the MPPT unit or what ever the voltage was, especially if you set the MPPT slightly lower than the PWMs voltage limit as well
