question

eyub avatar image
eyub asked

smart LiFePO4 battery cycle life counter

hello, we are new Victron installers in Iraq we have installed some system without any issues, all with smart lithium batteries but my wonder is that, since those batteries are warrantied for 2500 cycle at 80% DOD is there any counter built in the battery to count the number of cycles that were used or any other way to get this number?

for instance, since we have a daily power shortage in Iraq the batteries now are discharged every day depending on the shortage hour, some times they are only discharged to 60% and charged again should I take this as one cycle so then I will have one cycle every day and 2500 cycle will be about 7 years?

also what will happen after the 2500 cycle will the battery directly die or the efficiency decrease or what?

thanks

Lithium Battery
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Stefanie (Victron Energy Staff) avatar image
Stefanie (Victron Energy Staff) answered ·

Hi @eyub,

the SmartLithiums do not have a cycle counter built in. To count charge cycles, you would need at least a battery monitor (BMV702, 712 or SmartShunt), which will then record cycles.

AFAIK a full charge cycle is counted when SoC falls down below 50% and then recharged up to 100%.
After 2500 cycles the battery capacity decreases to something around 80% of it's initial capacity.

3 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

eyub avatar image eyub commented ·

thanks, dear @Stefanie for your useful replay, I checked the datasheets both for the (BMV702,712 or smart shunt) but I got their purpose but I couldn't understand the difference between them inorder to select on of them , and also can we view this counter data after we installed online on the vrm so we check the battery life of our projects from the office.

0 Likes 0 ·
Show more comments

Related Resources