question

xsilvergs avatar image
xsilvergs asked

Node-Red Temperature Sensor Node

Using Node-Red v2.6-large-image-7 on a RPi3 B+ with an mcp3208 ADC.

When I try to use the Temperature Sensor node I'm unable to select either sensor.


I get this message in the "Edit Temperature Sensor node" box:

Multiple temperature sensors were found with the same name. You can set a custom name for the device in Venus settings.

screenshot-at-2021-01-06-18-29-06.png


I am unable to see how to change the name of the sensor, any help would be much appreciated.


Node-RED
screenshot-at-2021-01-06-18-29-06.png (44.4 KiB)
1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Justin Cook avatar image Justin Cook ♦♦ commented ·

Moved to Modifications Space for non-Victron-supported systems/questions and to bring the question into the attention of other users of non-supported systems. Cheers!

0 Likes 0 ·
1 Answer
markus avatar image
markus answered ·

Hi,

On your Venus device:

go to Device List --> Temperature sensor you want to rename --> Device --> Name

You can enter a name for the sensor there.

BR


21 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

xsilvergs avatar image xsilvergs commented ·

@Markus

But I don't have a field called name


screenshot-at-2021-01-07-16-11-45.png

0 Likes 0 ·
screenshot-at-2021-01-07-16-11-45.png (32.5 KiB)
Show more comments