Home Assistant integration with Victron

Question

replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

This question was closed Dec 22, 2020 at 01:26 PM by fenix for the following reason: Other

question

fenix asked Dec 22, '20

Hello

i spend a lot of time to map Victron data to Home Assistant

i have match many field but there are 2 of them that I cannot find.. (Negative Values)

Any one know what they are?

i did the mapping base on the excel file

dbus_modbustcp/CCGX-Modbus-TCP-register-list.xlsx at master · victronenergy/dbus_modbustcp · GitHub

NOTE: the number at the end is the "vVctron Address"

MQTT home assistant

web-capture-21-12-2020-192242-venuslocal.jpeg (36.1 KiB)

1608596631984.png (33.8 KiB)

1608596658140.png (35.2 KiB)

1608596685230.png (13.9 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2020-12-22T13:25:53Z

fenix answered · Dec 22, 2020 at 01:25 PM

My Dashboard :-)

1608643528102.png (75.9 KiB)

1

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

David Cumps commented · Dec 18, 2022 at 08:42 PM

@fenix can you share your config please?

0 ·