question

Glenn avatar image
Glenn asked

AUTO GEN START for Cerbo GX with GX Touch Screen

Can someone help with how to design / make the auto gen start feature work with the above equipment? I'm replacing a Xantrex AGS connected to a Cummins 6KW gas generator. A diagram of the current system wiring is attached. I don't think it's difficult but I can't figure out how to do it. Thanks in advance!

1608083788066.png


Generator
1608083680936.png (557.7 KiB)
1608083788066.png (89.2 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
JohnC avatar image
JohnC answered ·

Hi @glenn2387

This is a summary of the available Victron options. See what fits.. https://www.victronenergy.com/live/auto-generator-start-stop:start


2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

harold avatar image
harold answered ·

You will have to add some logic an relays. and may be some controls/alarms too!
The Xantrex had it build in.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.