Is there a way to clear or reset the Digital Input Count in the VRM Summary page?
asked
Digital Input Count Clear/Reset in VRM Summary page?
I am not aware of a way to reset the counter for any usage other than a pulse meter.
Even though you are using the digital input as a door alarm, if you are using a VenusGX you might be able to temporarily set that digital input to a pulse meter, reset the counter under 'pulse meter' > 'settings', then set it back to a door alarm.
Thanks @Mark It's a roundabout way but I will give it a try.
For the @Victron Guys, perhaps adding this feature to other counters might be a good idea.
Edit: I quickly added a Reset Counter to the Digital Input and it works like a charm. Now just to remember to do that to every firmware upgrade until it's included in the release software.
