question

luckybeanz avatar image
luckybeanz asked

One GX Touch 50 to Multiple GX devices in two battery setup

Is it possible to connect a single GX Touch to a cerbo GX and a multiplus GX. The Cerbo will be connected to a 12v Bank with a REC BMS and the Multiplus to a 48v Bank with REC BMS.

Multiplus-IIcerbo gxBMS
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Guy Stewart (Victron Community Manager) avatar image
Guy Stewart (Victron Community Manager) answered ·

Hi @luckybeanz

There is no way to connect the GX touch display to the MultiPlus-II GX.

It is an accessory that is only compatible with the Cerbo GX.

4 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

luckybeanz avatar image luckybeanz commented ·

Okay, but if the GX touch is connected to the cerbo. The 12v battery to the cerbo and the 48v to the GX, what happens when the cerbo and the GX are connected together? Can the GX touch display information for both batteries?

0 Likes 0 ·
Guy Stewart (Victron Community Manager) avatar image Guy Stewart (Victron Community Manager) ♦♦ luckybeanz commented ·

There is no way to connect two GX devices together.

Do you have a system wiring diagram?

0 Likes 0 ·
Show more comments

Related Resources