I've got a BMV 712 hooked to a Cyrix LI relay but the BMV 712 relay doesn't seem to be following the parameters to open it close the relay as expected.
The only thing that will cause the BMV to change the state of the relay is when I hit the invert relay function. I've tried having the invert relay switch on or off and it never follows the voltage or soc low/high settings configured. The relay stays constantly on or off depending on how I have the invert relay function set... everything else seems to be ignored.
Can anyone shed some light on what I'm missing here? I get absolutely no reaction to any voltage or soc charge low/high events. I've tried different relay modes, disabling the event and enabling it, nothing. Thanks
Set to 24 low and 28 high, charger mode and it looks like it is working because the relay is closed since I'm at 26.9v.
But then I change the high voltage down to 25v and nothing happens. I would expect it to realize the voltage is high and open but it doesn't seem to care.
The only time I've been able to change the state is if I turn the invert relay switch on/off... otherwise it never changes state.
