Hello,
Are there any plans or consideration to bring the relay status on the VenusOS into the VRm so that we can see if it is switched on or off.
The state of relays in the BMV are already available.
asked
Relay Status in VRM
See also:
https://community.victronenergy.com/idea/60058/vrm-overview-of-ac2out-relay-status.html
and more similar thoughts
Relay status of the GX device (Cerbo GX, Venus GX, CCGX, etc.) is already available in VRM, see example:
Interestingly neither of my two installs has them shown. What have you got them configured for , Pump, Generator Start Stop......
Thanks
Kinda useful on the Cerbo - unfortunately only relay 1 is really properly flexible / useful.
I would very much like to see the relay states from any VBUS device - i.e. Multi / Quattro. We are using these (Primary, K1 & K2) in a semi sophisticated way on a site, and it would be nice to know that the Relay Assistants logic is doing what i think it should when i think it should do it. All a bit in the dark without.
