it would be useful to be able to use both relay 1 and relay 2 to control the generator and other equipment and above all to add the controls for the other relays present in the system (BWM 712, multiplus Compact and other)...relais 3... Relais 4...
Furthermore, the inversion function of the settings should be inserted because for example while the generator I want it to connect when the battery reaches 40% of remaining charge), or the refrigerator instead I want it to remain ON until 40% <SOC <100%. or when the sun is sufficient to guarantee operation ... ( maximum battery discharge not exceeding 20% in 5 hours .... ) for now these functions can only be managed manually.
Furthermore, a Custom Settings section should be entered where you can assign the name to the relay function and choose when it should go on and off with the generator parameter of SOC, Voltage, sun Power ecc ecc, also customizing the name.
