question

It’s literally advertised as being possible to connect through the VictronConnect app but this is a lie. All the Victron Connect app does is link to VRM.

You should be using Settings > DVCC on the Cerbo to control the charge current on the Multiplus. You can only remotely connect to VE.Direct devices (MPPT, BMV, etc) via the Victron Connect app. Not the can-bus devices (ie. inverters)

PS. You can change the inverter mode and input current limit on one of the dashboard pages. Click here:

@IsaiahJTurner

There are four ways to connect to the Cerbo.

The screen shot in your original post is what you see when connecting to the inverter directly through and Mk3 adapter specifically to program the unit, not through the Cerbo.

I have found using the local ip address the fastest on site. as bouncing it through the VRM needs the internet and that can be another story.

The input current limit on there Cerbo is under Devices - Multi - input current limit (three options down)

If it is set on the multi to be overridden by remote under the general tab you can change it right down to 3 or 4amps in depending on what models you have.

There is a lot to familiarize yourself with as a new user, and it will take time. I have never regretted buying Victron. Heck even my car has a small system in it.

I could be misunderstanding something but the sometimes overlooked very first step to access these settings is to click on Remote Console (in the black menu on the left side of the VRM page). Then, depending on what comes up, you may have to press the "return" button on the right-hand side to get to the "Device list". Scroll down and that's where the "settings" menu is.