question

packerhiker avatar image
packerhiker asked

I have a new BMV-712 Voltage shows .03V

This is always on the display. I have changed the power cable on B1. Same issue.

I do see Current in and consumed.

I have 3 lead acid (for the moment), and have isolated 1 to test this voltage setup.

battery charging
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Daniël Boekel (Victron Energy Staff) avatar image
Daniël Boekel (Victron Energy Staff) answered ·

Hi @packerhiker

My guess would be that you connected the battery sense cable to the auxiliary input instead of the main input on the shunt.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

packerhiker avatar image
packerhiker answered ·

I have made sure that it is plugged into B1 as instructed. It is plugged into the one closes to the multi-wire cable that goes to the meter.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.