Hello,
the Smart Meter connection to the Victron controller via Modbus RTU (RS485) is only wisely in case you have a short Way between the Smart Meter and the Victron Controller.
In case you have a long way or different buildings the connection over TCP/IP is required.
To prevent to install a separate RS485 Bus Cable. (using structured cabling !)
Installation Example:
#######Buildings-A############ ###Buildings-B###
EM24 -->RS485-->Modbus TCP Gateway---------TCP/IP---------------->CerboGX
Now the Question:
How can i add the Smart Meter Connection via Modbus TCP/IP to my Cerbo GX?
(FW 2.60)