question

mihair avatar image
mihair asked

DC tile not displayed as long as Multi is ON

Hi,


My RPI running VenusOS latest version is unable to display DC tile/loads even the feature is enabled on system settings.

The strange thing is that putting Multi on OFF state makes the tile appears on display.

Do you have any clue why this happen?


Thanks,

Mihai

MultiPlus Quattro Inverter ChargerCCGX Color ControlRaspberry Pi
2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

markus avatar image markus ♦♦ commented ·

Hi, what Firmware version is installed on your Multi?

Regards,

Markus

0 Likes 0 ·
Show more comments
1 Answer
Paul B avatar image
Paul B answered ·

do you have a BMV-7?? installed otherwise you dont have a DC system and thus it would be turned off I would think

please send a picture off the Venus GX of the units connected and a picture of the issues.


thanks

4 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

boekel avatar image boekel ♦ commented ·

if you have a BMS you don't need a BMV

0 Likes 0 ·
mihair avatar image mihair boekel ♦ commented ·

Exactly. BMS has his own method to count the energy in and out

0 Likes 0 ·
Paul B avatar image Paul B mihair commented ·

Yes but is it conected to the Venus through a VE Direct cable like a BMV is

anyway some bms bms systems do not measure the current in/out.

0 Likes 0 ·
mihair avatar image mihair Paul B commented ·

I have REC BMS connected via CAN bus to CCGX. It can accurately count battery DC current In and Out. All the DC loads are taken into consideration because they are installed after the BMS's shunt

0 Likes 0 ·