question

Henk van Rooyen avatar image
Henk van Rooyen asked

Migrate settings from CCGX to Cerbo GX

Hi:

I have to replace a Color Control GX due to it being overloaded (slow, rebooting, high load averages) after expanding my system. Have already purchased a Cerbo GX.

Question:
Is there a reasonably easy way to transfer settings from the old device to a new one, or will I have to do this screen by screen? I am hoping that it may be as easy as SSH in / copy a few config files and directories to and from SD card / reboot?

Thanks

Henk

VEConfigure 3gx devicesetuplinux
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Guy Stewart (Victron Community Manager) avatar image
Guy Stewart (Victron Community Manager) answered ·

Hi Henk,

The official answer is you will need to do it setting by setting. There is no supported way to move settings from one GX to another GX.

For anything else more unsupported and experimental, please ask again in the Modifications space.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Victron panels and system monitoring products page

Victron GX device product family comparison table

Cerbo GX topic page

Additional resources still need to be added for this topic