question

whalby avatar image
whalby asked

Not getting any reading on bmv 712

I have my BMV 712 hooked up and it is showing 13.04 volts but the amps, watts, and AH are all displaying 0.00. The %says 100 and inf hours. Any thoughts?

victron products
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

In most cases there is a wiring issue.
Can you make some pictures and/or a wiring diagram how you wired the shunt?

2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

whalby avatar image whalby commented ·


thanks here’s a pic that I took earlier when I was in the RV I can take more tomorrow if this does not show what you need . Or, answer questions about it thanks

0 Likes 0 ·
58e544d2-0fda-45ee-9650-94186c261245.jpeg (2.8 MiB)
Show more comments
whalby avatar image
whalby answered ·

thanks here’s a pic that I took earlier when I was in the RV I can take more tomorrow if this does not show what you need . Or, answer questions about it thanks


5acb636c-148d-4752-835e-395ef1e1ee98.jpeg


5acb636c-148d-4752-835e-395ef1e1ee98.jpeg (2.8 MiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic