This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hello
Trying to update firmware remotely via vrm using ccgx. Everything is working. Ccgx is sending data and two way communications are enabled. I get below error msg:
"The site's two-way communication service did not respond. Have you enabled it on your Venus device?
Error Code: 1392"
That unauthenticated device error links to a Reset authentication token button.
Press that and follow instructions.
It can (sometimes) happen when updating to v2.20. We’ll fix this in the next version.
That's strange, it's really acting as if "VRM two way communication" is off.
What version of CCGX firmware are you running?
Maybae you can try switch OFF two way communication and then turn it ON again.
Hello
It's the latest software. I updated via sd card because I was on 1.7x now it's 2.2
I have restarted the ccgx several times and enabled disabled two way communications several times with no luck.
I also got this error pop up:
Error
2 hours ago, data from an unauthenticated device has been received for this installation. Click here for more information
Thanks
It's not clear what that error is because that relates to your logged in VRM session, so the link does not work for other people, we just see a VRM login box.
I wonder if there is some port blocked on your router or the ISP is blocking something, although you do not normally need to forward any ports for this to work properly.
No, no blocked ports.
I have updated the ve can mppt 150/70 before through the old program, no problems.
This is quite strange.
You can see that two way communication is enabled here. 
OK thanks. Any thoughts on not being able to connect to update firmware remotely?
the issues are related. so first fix that error, then try remote firmware updates again.
