question

kaney avatar image
kaney asked

MPPTs switching off after update

Since update (v1.53) a couple of days ago both my MPPTs switch off briefly at about 6pm and again at about 6am. This morning though my front One turned on and off about 6 times in quick succession. I’ve checked all the connections and they are good. I’ve also checked all the settings and they are still as I had set them. Anyone else having issues after updating?

firmware update
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Meine_Energiewende avatar image
Meine_Energiewende answered ·

Nearly the same problem here with a 150/35. It stops delivering power to my battery on a bright sunny day. If i use the breaker of my solar panels (disconnect / reconnect) it works fine till the next "shutdown".

MPPT State always shows "external control" which is correct.

Any ideas ?

Jens

PS: worked till the update to 1.53 .... my 150/45 has no issues.



1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Meine_Energiewende avatar image Meine_Energiewende commented ·

Just updated to 1.54 and hope this will solve my problem.

Jens

0 Likes 0 ·

Related Resources

Additional resources still need to be added for this topic