This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi
I have a system that requires the multiplus to have Ac out only when there is shore power (Ac in) And use the powers assist
The shore power is limited to 10 amps and the system has very short spikes of 15 amps And generally runs at around 6.5 amps so will charge the lithium battery in between spikes
Is there an assistant that can manage this or would the use of a relay be required.
Regards
Grant
you just need to adjust the current limit in the Multiplus to 10 amps this is done with a MK3 and the victron VE configure program or you can add a Victron DMC unit which is a remote switch and Knobe
Hi , yes but I only want the Ac out to be on when Ac in is present, so the system can’t run on the batteries, and only are only used to power assist.
you can set the unit to 'charge only' this way it will only power up when AC is present on input.
Plus set a 10A input current limit.
