This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi,
is there a setting that allows the Multiplus-22 (+VenusGX) to only charge my Pylontechs but not discharge them at all.....so that any grid power going back would be charged to the batteries but if any power is requrired from the grid it would take it and the Multiplus would not act as an inverter.
Thanks,
Norbert
You mean always full Batterys?
Yes, this is possible.
no i mean that the multiplus II does charge the overproduced Solar power (to set the overall power from the Modubs Meter to ZERO) BUT does not start the inverter at all.
So it would increase SOC day by day until it reaches 100% some day.
Long story short, the inverter functionality of the Multiplus would be OFF. Ideally i would love to send MQTT statements that fulfill this feature to turn on/off via MQTT. Thanks
OK Thanks - that was the "solution" that i came up with - but i thought that there is a switch/flag that turns on off the inverter. Zero Watt would be the same i guess.
I never did this, but is it also possible to write to VenusGX via MQTT so i can set parameters, how would i do that?...what is the MQTT subject,....THANKS
Hello @njordan it seems to me you missed my answer 3 days ago. Look in the Comments :
Thats possible. You can complete remote controll via MQTT
https://www.victronenergy.com/live/ess:ess_mode_2_and_3
