Hello I have 250watt x2 panels in series. I have 4×220 Ah battersea (total 880 Ah). I folow my battery voltage from BMV 700 monitör and also from the mesurment device on my inverter. Now both shows 11.7 Volt . My problem is during night time when the mppt is off I see same volt on my mppt application in my phone. So normally the morning it should be bulk but in a very short time it goes float since it shows 13.8 Volt float voltage limit. From settings I increase float limit to 14 volt . In a second it is ön float volt showing batteries voltage 14 volt I again decrease 13.8 volt and system shows 13.8 and remain float. What could it be the reason stucking in float mod?
