Hi, I'm also trying to see if I need use a Thermostatic bimetal tempertaure sensor https://www.tro-pacific.com/collections/controller/products/thermostat-no-10-50-deg-c-61-x-34-x-35-mm
to measure the temperature inside an electrical box and connect this to CERBO GX Temp inputs to trigger a relay switch and turn on an extraction fan.https://www.tro-pacific.com/products/filter-fan-58m3-h-230v-50-60hz
Question:
1. Is this possible to connect this Thermostatic bimetal temp sensor to CERBOGX?
2. Do I need to use Thermostatic bimetal temp sensor or could use victron sensor somehow for this purpose? https://www.victronenergy.com/live/temperature_sensors