question

jose-julian avatar image
jose-julian asked

Does not draw voltage mppt blue solar 75v / 15

Good afternoon. I have a regulator connected to a solar panel and a battery. It has been working perfectly for me to light two 12v bulbs in a country house.


I have noticed that there is no voltage coming out of the LOAD output. I disconnect the fuses from the loose board the battery and reconnect everything. It takes voltage out of LOAD for 3 or 4 minutes and stops doing it. I have looked at the fuse on the regulator and it is fine.


I discard the battery because I have tried two and the same thing happens to me.


What can happen to him?


Thank you very much

BlueSolar PWM
3 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Alexandra avatar image Alexandra ♦ commented ·

@jose julian

What are your settings for the load output on the mppt?

0 Likes 0 ·
Show more comments
1 Answer
davidq avatar image
davidq answered ·

More details please. Panels and thier configuration and batteries. You mention MPPT in title but have tagged the question under PWM. Which is it? Dave

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic