Battery profile help please

Hello

My son is converting a 2015 Ford Transit to a camper van. We believe it has a "smart" alternator.

He has bought a Victron Orion-Tr Smart 12 12 30 charger and a Varta LFD 180Ah leisure battery. We've connected the charger to the 60A "customer connection point" (CCP).

Would one of the standard AGM deep cycle profiles be appropriate for this battery? If not, what would be appropriate values for a user defined profile?

If we start with a standard profile, is it possible to monitor the graph in the app and use it to make adjustments to the profile? If so, what is the strategy?

Thanks in advance for any advice. Sorry, we're new to all this!

Doug

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Alexandra ♦ commented · Oct 24, 2020 at 05:23 PM

@Doug24

You would need to see what varta recommend for the battery it should have the information on the side of the battery or on a spec sheet that came with the battery.

Usually I pick the profile then tweak the voltages that way you have the corect absorption time and charge profile set.

14.2 v is probably the charged voltage. Again just check the info.

Also make sure the 30A charge current is also not too high for the battery as well by using it's c rating.

Example a 190ah battery with a C10 rating should only be charged max with 19A

0 ·

Show more comments