question

tyronmarais avatar image
tyronmarais asked

How do I get 5 250/100 mppt to communicate via can bus on ccgx.

Hav put in termination jumper both ends . Cables all tested. Cannot see the mppt on ccgx

MPPT SmartSolarCCGX Color Control
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Daniël Boekel (Victron Energy Staff) avatar image
Daniël Boekel (Victron Energy Staff) answered ·

Hi @tyronmarais

I've moved your post to the general section (it was in 'modificatons')

All that should be necessary is to set baudrate at 250 kbps.


2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.