This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi. How do i fined out what error code number i have? I have a bulk / absorption flashing lite. In victron tool kit it could be one of 3 options, grate news. so how do i actually fined out what the problem is? i have looked in victron connect but carnt fined anything. Do i have to pay another £90 pound on an mppt control unit? or worse a cerbo?
If I found the correct error you have the "Internal Error" with #119, #116 or #21.
Did you tried the described solution for #119?
#116 and #21 can't be resolved and the device have to be replaced (warranty).
https://www.victronenergy.com/live/mppt-error-codes
The MPPT-control will not give you additional infos.
Hi. I shut it down and fired it back up. Second day now still working. I would like to know what corses the issue as well as be able to access proper data from the mppt controller itself, instead of having to pay for other monitoring equipment. The mppt control does mention about error codes? After buying the bmv which is a waste of space, not going down that root with the mppt control.
