This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I own a 2016 Winnebago Navion which has two 12v batteries in parallel. I can see where one 12 v+ leads feeds the shunt leading into my inverter, but then there are two additions cables one (-) and one (+) going to what I think is the boost switch on this coach. Where and what wires go where with these extra two leads for my BMV12
Hi @Guy Venuti,
It really helps in these cases if you could draw a diagram of your system (as best as you are able), and accompany it with some photos, to help work out what is going on.
