Hello,
I just upgraded my Cerbo GX to 2.6 from 2.51 and am no longer getting the Battery SOC and Time Remaining displayed on my Maretron DSM 410.
If I revert back to 2.51 both values display correctly but if I promote to 2.6 I lose those values. Voltage and Current work in both scenarios. I looked through the settings on the Cerbo GX, but could not find specifically a setting that would affect this.
On the Maretron I am picking up "Any" device instance, I also tried to specify a specific battery monitor rather than "Any" on the Cerbo.
I have the Smart Shunt, and two Multiplus' in parallel. There is a BMS as well on 3 Victron Lithium SmartBatteries (300ah) for a total house bank of 1200ah.
It is definitely a change from the firmware as I can toggle between the firmware versions consistently to get it to work on 2.51 and not on 2.6. Any thoughts?
Thanks,
Tony